09.00 -09.15

Welcome and Opening Address

Univ.-Prof. Dr.-Ing. S. Helduser,

Institut für Fluidtechnik, TU Dresden, Germany

09.15 - 10.30

Group A:

Energy-Efficiency of Mobile Machinery

Room 38

Chairman:

Univ.-Prof. Dr.-Ing. H.-H. Harms, TU Braunschweig, Germany

Simulative Study on Variable Frequency Controlled Hydraulic System for Shield Cutterhead Drive

Hu Shi, Dr. Guofang Gong, Prof. Dr. Huayong Yang, 

Zhejiang University, State Key Laboratory of Fluid Power Transmission and Control, Hangzhou, 

Zhejiang, China

Applied Control Strategies for a Pump Controlled Open-Circuit Solution

K. Heybroek, Prof. J.-O. Palmberg,

Linköping University, Sweden

J. Larsson,

Volvo Construction Equipment, Eskilsturra, Sweden

10.30 - 11.00

Break

11.00 - 12.45

Group A:
Energy-Efficiency of Mobile Machinery

Group B:
Valves

Room 38

Room 37

Chairman:
Dr.-Ing. G. Keuper,
Bosch Rexroth AG, Schwieberdingen

Chairman:
Prof. Dr.-Ing. A. Feuser,
Bosch Rexroth AG, Lohr, Germany

Possibilities of Hydrostatic Energy Recovery in Vehicle Shock Absorbers, a Study Using Multisystem Simulation and an Experimental Demonstration Model

Realistic Models of Electrohydraulic Servovalves

Prof. Dr. Eng. H. Abaitancei,
Prof. Dr. Eng. G. Al. Radu, Prof. S. Radu,
A. Dumitrovici, I. Dumitrovici,
Transilvania University Brasov, Romania

Prof. J.-Ch. Mare, B. Attar,
Institut National des Sciences Appliquées, Toulouse, France

QFT Robust Control for Regenerative Braking of Hydrostatic Transmission Hybrid Vehicle

The Stiffness of Armature Support in Servovalve Torque-Motors

Sun Hui, Jiang Ji-hai, Wang Xin,
Harbin Institute of Technology, Harbin, China

Prof. E. Urata, K. Suzuki,
Kanagawa University, Department of Mechanical Engineering, Yokohama, Japan
T. Mori,
Kanagawa University, URATA Laboratory, Yokohama, Japan

Mathematical Modeling of Hydrostatic Transmission Including an Experimental Validation

Model Based Optimisation of Servo Pneumatic Valves

Prof. Dr. J. Petric, D. Libl, D. Milanovic,
University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia

Dipl.-Ing. M. Fiedler,
Univ.-Prof. Dr.-Ing. S. Helduser,
Institut für Fluidtechnik, TU Dresden, Germany

Simulation Model of Hydraulic Power Transmission of Teleoperated Mobile Machine and Development and Research work of Advanced Velocity control via Simulations

Simulation Study of the Novel Valve Arrangement Used in Hydraulic Control System

Prof. Dr. K. Huhtala, Dr. Tech. J. Vilenius,
Institute of Hydraulics and Automation, Tampere University of Technology, Finland

Dr.-Ing. Bing Xu,
Yingjie Liu, Huayong Yang, Yangbin Wang,
State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China

12.45 - 13.45

Lunch

13.45 - 15.30

Group C:
Stationary Machinery

Group D:
New Materials and Fluids

Room 38

Room 37

Chairman:
Prof. R. Scheidl,
Johannes Kepler University Linz, Austria

Chairman:
Univ.-Prof. Dr.-Ing. H. Murrenhoff,
IFAS, RWTH Aachen, Germany

Adaptive Pressure Control Using Variable Speed Pumps

Design and Experimental Evaluation of a Fast Magnetorheological (MR) Actuator

Dr.-Ing. R. Bonefeld,
M. Eng. Ch. Lebert,
Bosch Rexroth AG, Lohr, Germany
 

J. Kostamo, E. Kostamo,
Dr. J. Kajaste, Prof. M. Pietola,
Department of Machine Design,
Helsinki University of Technology, Finland 

Current State, Problems and Innovative Solution to the Electro-Hydraulic Technology of Pump Controlled Cylinder

Experimental Study of Flow Electrification under the Condition of Velocity Change with Time

Prof. Dr. Quan Long,
Taiyuan University of Technology, Institute of Mechatronics Engineering, Taiyuan, China

Prof. S. Takahashi, S. Washio,
T. Tazato, S. Zhu,
Okayama University, Japan

Fast Prototyping Approach in Design of Electrohydraulic Drive Controls for Modern Machine

"Smart Fluids" for Transport Technologies - new Electrorheological Fluids for Semi-Active and Active Suspension Systems

Prof. K. Janiszowski, Prof. M. Olszewski,
Institute of Automatic Control and Robotics, Warsaw University of Technology, Poland 

Dipl.-Ing. L. Johnston, Dr. H. Rosenfeldt,
Fludicon GmbH, Darmstadt, Germany

Model Based Motion Control for Hydraulic Linear Drives 

How to Reduce Filtration Costs of Complex Hydraulic Systems

Prof. Dr.-Ing. P. Anders,
Hochschule Furtwangen, Germany
Dipl.-Ing. D. Kuner,
TR-Systemtechnik GmbH, Trossingen, Germany
 

C. Peuchot,
Institute of Filtration and Techniques of Separation, Agen, France

15.30 - 16.00

16.00 - 17.45

Group E:
Pumps

Group F:
Fundamentals

Room 38

Room 37

Chairman:
Prof. Dr.-Ing. M. Ivantysynova,
Purdue University, West Lafaytte, USA

Chairman:
Univ.-Prof. Dr.-Ing. D. G. Feldmann,
TU Hamburg-Harburg, Germany

Modeling and Simulations of an Axial Piston Pump for Flow Ripple Analysis

Fluidtronic-Development
Environment for Fluidics and Mechatronics

Ma Jien,
State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China

Dipl.-Ing. M. Jung, Dipl.-Ing. J. Müller,
Werkzeugmaschinenlabor WZL, Lehrstuhl für Produktionssystematik, RWTH Aachen, Germany

On Optimal Design of Hydrostatic Machines

New Concept for the Development of a Relief, Anti-Shock and Anti-Caviation Cartridge Valve

L. Ericson, Prof. J. Ölvander,
Prof. J.-O. Palmberg,
Linköping University, Sweden

Dr. A. Vacca, M. Greco,
Industrial Engineering Department,
University of Parma, Italy
A. Fornaciari, Walvoil S.p.A., Italy

Poiseuille-Couette Flow and Heat Transfer with Variable Viscosity in the Rotary Sealing Gaps of Rotary Hydraulic Cylinder

Dynamic Characteristic Simulation of Long Pipe with Mineral Oil 

Dr.-Ing. Yang Huayong,
Zhou Cheng, Dr. Guofang Gong,
State Laboratory of Fluid Power
Transmission and Control,
Zhejiang University, Hangzhou, China

Dr.-Ing. L. Hruzik, Ing. R. Sikora, Dozent Dr. M. Kozubkovà,
Department of Hydromechanics and Hydraulic Equipment, Technical University of Ostrava, Czech Republik

Tribological Conditions Between Swashplate and Slipper Pad in Variable Displacement Water Hydraulic Axial Piston Unit

Power Recovery of Brine Pressure Using Hydrostatic Pressure Exchanger in Seawater Desalination System

M. Rokala, Prof. Dr. Tech. Kari T. Koskinen,
Institute of Hydraulics and Automation, Tampere University of Technology, Finland
Dr. sc. Tech. O. Calonius, Prof. M. Pietola,
Institute of Machine Design, Helsinki University of Technology, Finland

Dr. Ham Young-Bog, Dr. Park San-Jin,
Korea Institute of Machinery and Materials, Daejeon, Korea
Prof. Dr. Jeong Heon-Sul,
Kunsan National University, Korea

19.30

09.00 - 09.45

Welcome and Opening Address

Prof. H. Kokenge,

Rector of Technische Universität Dresden

MinR. Dr. K. J. Exner,

German Federal Ministry of Economic Affairs and Technology

Dipl.-Ing. Ch. Kienzle,

President of Fachverband Fluidtechnik im VDMA e.V.

09.45 - 11.15

Session 1:

Components and Systems for Energy-Efficient Mobile Machinery

Großer Saal

Chairman: Dr. G. Jacobs, Bosch Rexroth AG, Elchingen, Germany

General Lecture

Efficiency of Hydrostatic Drives of Some Selected Construction Machines

Dr.-Ing. H. Pfab,
LIEBHERR-Werk Bischofshofen GmbH, Austria
Dr.-Ing. N. Krimbacher,
LIEBHERR-Werk Nenzing GmbH, Austria

Professional Lectures

Development of a new Powertrain for Wheel Excavators as an Example 

for System Integration and Collaboration with Suppliers

Dr.-Ing. T. Berg

Caterpillar-EDC, Wackersdorf, Germany

Dipl.-Ing. J. Geis,

ZF Friedrichshafen AG, Germany

Drive Line Simulation for Increased Energy-Efficiency of Off-Highway-Machines

Dipl.-Ing. H. Jähne,

Institut für Fluidtechnik, TU Dresden, Germany

Dipl.-Ing. T. Kohmäscher,

IFAS, RWTH Aachen, Germany

Dipl.-Wirtsch.-Ing. H. Deiters,

Institut für Landmaschinen und Fluidtechnik, TU Braunschweig, Germany

Dipl.-Wirtsch.-Ing. M. Bliesener

Lehrstuhl für mobile Arbeitsmaschinen, TH Karlsruhe, Germany

Systematic of Hydrostatic Drive Trains for Mobile Applications

Dr.-Ing. M. Kliffken, Dr.-Ing. B. Langenbeck, Dipl.-Ing. St. Mutschler, Dr.-Ing. M. Weber, 

Bosch Rexroth AG, Elchingen, Germany

11.15 - 11.45

Break

11.45 - 13.00

Proportional Directional Valve with Autonomous Spools (PAS) for Mobile Application

Dr.-Ing. G. Fees, Dr.-Ing. H. Jongebloed,

Wessel-Hydraulik GmbH, Wilhelmshaven, Germany

Energy-Efficient Electro-Hydraulic Control Systems for Mobile Machinery / Flow Matching

Dipl.-Ing. R. Finzel, Univ.-Prof. Dr.-Ing. S. Helduser,

Institut für Fluidtechnik, TU Dresden, Germany

A High Energy Efficency Mobile Fluid Power System – Novel System Layout and 

Measurements

B. Eriksson, Prof. J.-O. Palmberg,

Linköping University, Sweden

M. Rösth, 

Mobile Controls Division Europe, Parker Hannifin AB, Boräs, Sweden

Haptic Feedback for Mobile Machines

Dipl.-Ing. H. Hayn, Dipl.-Ing. D. Schwarzmann,

Robert Bosch GmbH Stuttgart, Germany

13.00 - 14.00

14.00 - 15.30

Session 2:
Environmental Acceptability, Safety and Availability of Fluid Power Systems

Session 1:
Components and Systems for Energy-Efficient Mobile Machinery

Availability of Fluid Power Systems

Großer Saal

Saal 1

Chairman:
Univ.-Prof. Dr.-Ing. H. Murrenhoff,
IFAS, RWTH Aachen, Germany

Chairman:
Dr.-Ing. J. Weber,
CNH Baumaschinen GmbH, Berlin

General Lecture

Condition Monitoring in Fluid Power Technology
- a comprehensive approach

Robust Control for a Dual Stage Power Split Transmission with Energy Recovery

Dr.-Ing. J. Bredau,
A. Winter, Dr.-Ing. P. Post,
Festo AG & Co. AG, Esslingen, Germany
Dr.-Ing. F. Bauer,
Hydac International GmbH, Sulzbach, Germany

K. Williams, R. Kumar,
Prof. Dr.-Ing. M. Ivantysynova,
Purdue University, Maha Fluid Power Research Center, West Lafayette, USA

Professional Lectures

Automated Oil Condition Monitoring with an Intuitive Human-machine Interface

Assistance Functions in Mobile Hydraulics with Controlled Cylinder Drives

Dr.-Ing. Th. Meindorf,
Argo-Hytos GmbH, Kraichtal, Germany
Dipl.-Ing. Ch. Riedel,
IFAS, RWTH Aachen, Germany

Prof. Dr.-Ing. h. c. H.-H. Harms,
Dipl.-Ing. T. Stamm von Baumgarten,
Institut für Landmaschinen und Fluidtechnik, TU Braunschweig, Germany
H. von Biedersee,
MTS Sensor Technologie GmbH & Co. KG, Lüdenscheid, Germany

Online-Condition Monitoring for Servopneumatic Drives

Online Minimization of Power Losses in Distributed Digital Hydraulic Valve System

Dipl.-Ing. F. Schnur,
Norgren GmbH, Fellbach, Germany

Dr.-Ing. M. Linjama, M. Huova, Prof. M. Vilenius,
Tampere University of Technology, IHA, Tampere, Finland
P. Boström, M, Waldén,
Åbo Akademi University, Turku, Finland

Safety Mechatronics as a Trend in Industry Automation

Auto generated production code for hydraulic systems

Dipl.-Ing. (FH) K. Gabriel, Festo AG & Co. KG, Esslingen, Germany

Dr.-Ing. P. Lauer,
Eaton Hydraulics, Eden Prairie, Minnesota, USA

Economic Evaluation of Hydrostatic Drive Train Concepts for Mobile Machinery

Dipl.-Ing. St. Mutschler,
Bosch Rexroth AG, Elchingen, Germany

15.30 - 16.00

Break

16.00 - 17.30

Session 2:
Environmental Acceptability, Safety and Availability of Fluid Power Systems

Session 2:
Environmental Acceptability, Safety and Availability of Fluid Power Systems

Großer Saal

Saal 1

Chairman:
Univ.-Prof. Dr.-Ing. H. Murrenhoff,
IFAS, RWTH Aachen, Germany

Chairman:
Prof. M. Vilenius,
Tampere University of Technology, IHA, Tampere, Finland

Condition Monitoring at Hydrostatic Pumps and Gears

Safety Related Hydraulic Circuits - Examples according EN 954 and EN 13849

W. Eichner, T. Torikka,
Bosch Rexroth AG, Horb, Germany

G. Elffers, L. van der Meij,
Corus Strip Products IJmuiden, Netherlands

Online Diagnosis for the Pneumatic System of Welding Guns

Application of the EN ISO 13849 in Electro-hydraulic Drives

Dipl.-Ing. St. Fritz,
Univ.-Prof. Dr.-Ing. H. Murrenhoff,
IFAS, RWTH Aachen, Germany

Dr.-Ing. J. Barg, Dipl.-Ing. Ch. Langenstein, Bosch Rexroth AG, Lohr, Germany

New Tools to Optimize Cleanliness Management of Fluid Power Systems

Innovative Bearings for Modern Hydraulic Solutions

C. Peuchot,
Institute of Filtration and Techniques of Seperation, Agen, France

Dipl.-Ing. W. Losert, Schaeffler KG, Herzogenaurach, Germany

Hydraulic Fluids – Multi Grade Fluids
Based on Special Synthetic Base Fluids

Latest Results with the MPH Test Procedure – Substitution of the Vane-Cell-Pump-Test according to DIN 51389

Dipl.-Ing. W. Bock,
Fuchs Europe Schmierstoffe GmbH, Mannheim, Germany
Dr.-Ing. G. Lingg,
Fuchs Petrolub AG, Mannheim, Germany

Dr.-Ing. J. Schmidt, Prof. Dr.-Ing. D. Krause,
Institut für Produktentwicklung und Konstruktionstechnik, TU Hamburg-Harburg, Germany

19.00

09.00 - 11.00

Session 3:
Components and Systems for Stationary Machinery

Session 4:
Pneumatics in Automation

Großer Saal

Saal 1

Chairman:
Prof. Dr.-Ing. A. Feuser,
Bosch Rexroth AG, Lohr, Germany

Chairman:
Dr.-Ing. P. Post,
FESTO AG & Co. KG, Esslingen, Germany

General Lecture

General Lecture

Advancements in Electrohydraulic Drive Technology and Control Technique of Stationary Machinery

Pneumatic Drive Technology,
Innovative and Userfriendly?
 

Univ.-Prof. Dr.-Ing. S. Helduser, Institut für Fluidtechnik, TU Dresden, Germany

Dr.-Ing. P. Saffe,
Bosch Rexroth AG, Laatzen, Germany

Professional Lectures

Professional Lectures

Co-Simulation of the Injection Unit of a High Speed Injection Moulding Machine

Microtechnology in Industrial Application

Dipl.-Ing. St. Räcklebe,
Univ.-Prof. Dr.-Ing. S. Helduser,
Institut für Fluidtechnik, TU Dresden, Germany
Prof. W. Michaeli, A. Schreiber,
Institut für Kunststoffverarbeitung, RWTH Aachen, Germany
Dr. P. Filz, Dr. K. Webelhaus,
Simcon Kunststofftechnische

Dr.-Ing. A. Muth,
Festo Microtechnology AG, Pieterlen, Schweiz

Improvement of Drive Performance Using Digital Control Electronics in the Field of Plastic Injection Molding Machines

Minimization of the Signal Transmission Delays for the Fast Actuation of Pneumatic Drives

Dr.-Ing. A. Köckemann,
Bosch Rexroth AG, Lohr, Germany

Prof. Dr.-Ing. habil. W.-D. Goedecke,
GAS Automation GmbH, St. Georgen, Germany

Conversant Technology – New Key Aspects:
Development of VariableSpeed Drives
 

Pressure Control System for Foaming Tools

Dr.-Ing. M. Ristic,
Bosch Rexroth AG, Lohr, Germany

Dipl.-Ing. R. Bachmann,
Bürkert Werke GmbH & Co. KG, Großröhrsdorf, Germany

Structural Tests of Airbus A380 with Hydraulics

Computing the Macroscopic Parameters of a Family of Pneumatic Components using Local Parametrization of CFD Solutions

F. Eichelbaum,
Industrieanlagen Betriebsgesellschaft mbH, Dresden, Germany
K. Wagner,
Herbert Hänchen GmbH & Co. KG, Ostfildern, Germany

Prof. E. Bideaux, A. Azdasher,
Institut National des Sciences Appliquees (INSA) de Lyon, Villeurbanne, Laboratoire Ampere, France
Dr. M. El Hajem, Prof. J.-Y. Champagne,
Institut National des Sciences Appliquees (INSA) de Lyon, Villeurbanne, Laboratoire d

11.00 -11.30

Break

11.30 -13.00

Virtual Design of Electro-Hydraulic Valvesystems

Pneumatic Highforce Cylinder for Reduced Operating Pressure

Dipl.-Ing. D. Wehner,
Univ.-Prof. Dr.-Ing. S. Helduser,
Institut für Fluidtechnik, TU Dresden, Germany
Dr.-Ing. H. Lausch,
Dr.-Ing. G. Schoppel, W. Volpert,
Bosch Rexroth AG, Lohr, Germany

Dipl.-Ing. F. Gevers,
Norgren GmbH, Alpen, Germany

Model Parameter Estimation for an Electro-hydraulic Motion System to Aid Controller Design

Pneumatic Drive Systems for the Assistence Robotics

Prof. A. Plummer,
Department of Mechanical Engineering, University of Bath, UK

Dr.-Ing. R. Neumann, Dipl.-Ing. A. Hildebrand, Dipl.-Ing. E. M. Knubben,
Festo AG & Co. KG, Esslingen, Germany

Increasing the Dynamic Load Stiffness of Electrohydraulic Linear Drives

Study of Non-anthropomorphic Pneumatic Muscle Actuated Gripper

Dipl.-Ing. M. Reichert,
Univ.-Prof. Dr.-Ing. H. Murrenhoff,
IFAS, RWTH Aachen, Germany

Prof. Dr.-Ing. T. Deaconescu,
Assoc. Prof. Dr.-Ing. A. Deaconescu,
Department of Production Systems and Economic Engineering,
Transilvania University of Brasov, Romania

Improvenment of the Overall System Efficiency of a Flat-jaw Cross Rolling Machine by the Retrofitting of the Hydraulic Drive and Control System

Modelling of Friction Phenomena in Pneumatic Cylinders

Dr.-Ing. D. Klug, Dipl.-Ing. M. Hoffmann,
Fraunhofer-Institut Werkzeugmaschinen und Umformtechnik, Chemnitz, Germany

Dr.-Ing. M. Achenbach,
Dipl.-Ing. Th. Papatheodorou,
Parker Hannifin GmbH & Co. KG, Bietigheim-Bissingen, Germany

13.00 -14.00

Lunch

14.00 - 15.30

Session 5:
New Fluid Power Solutions for Vehicle Technology

Session 6:
Fundamentals of Fluid Power

Großer Saal

Saal 1

Chairman:
Prof. J.-O. Palmberg,
Linköping University, Sweden

Chairman:
Prof. A. Plummer,
University of Bath, UK

General Lecture

General Lecture

Hydraulic Systems in Automotive Applications –
Criteria for Competitiveness

Virtual Models, Simulation and Bench Testing-
Tools for Innovative R & D in Fluid Power
 

Dr.-Ing. A. Bootz,
BMW AG, München, Germany

Prof. Dr.-Ing. D. G. Feldmann,
TU Hamburg-Harburg, Germany

Professional Lectures

Professional Lectures

Energy Efficiency of the Hydrid

CFD-Simulation of the Reversing Process
in External Gear Pumps
 

Dr.-Ing. P. A. J. Achten, Dipl.-Ing. G. Vael,
Innas BV, Breda, Netherlands
Dipl.-Ing. T. Kohmäscher, M. Sc. M. Ibrahim Sokar,
IFAS, RWTH Aachen, Germany

Dipl.-Ing. W. Wustmann,
Univ.-Prof. Dr.-Ing. S. Helduser,
Institut für Fluidtechnik, TU Dresden, Germany
Dipl.-Ing. W. Wimmer,
Haldex Hydraulics GmbH, Hof, Germany

Power Demand of Load Adaptive Attenuation of Pressure Pulsation in Automotive Systems

Effects of Some Relevant Design Parameters on External Gear Pumps Operating: Numerical Predictions and Experimental Investigation

Dipl.-Ing. J. Rösner, Prof. Dr.-Ing. P. Pelz,
Fachgebiet Fluidsystemtechnik, TU Darmstadt, Germany
Dr.-Ing. A. Bootz,
BMW AG, München, Germany

Dr. A. Vacca, Prof. P. Casoli, Dr. G. Franzoni,
University of Parma, Industrial Engineering Department, Italy
M. Guidetti,
Casappa S.p.A, Italy

Pressure Control Valves for Automotive Applications

Measurements, Analysis and Simulation of Cavitation in an Axial Piston Pump

Dipl.-Ing. F. Fuchshumer,
Dipl.-Ing. F. Herold, Dipl.-Ing. M. Casimir,
Hydac Electronic GmbH, Saarbrücken, Germany

Dr.-Ing. O. Meincke, Dr.-Ing. R. Rahmfeld,
Sauer-Danfoss GmbH & Co. OHG, Neumünster, Germany

15.30 - 16.00

Break

16.00 - 17.30

Potential of Semi-active Controlled Damping in Cab Suspensions for Agricultural Tractors

The Hydraulic Buck Converter
Concept and Experimental Results
 

Dipl.-Ing. U. Scheff,
John Deere Werke, Mannheim, Germany

Univ.-Prof. Dr. R. Scheidl,
Univ.-Prof. Dr. B. Manhartsgruber,
Johannes Kepler University Linz, Austria
Dr. H. Kogler, Dr. B. Winkler,
Linz Center of Mechatronics GmbH, Linz, Austria

Model Based Determination of Hydraulic Drive Requirements for Driving Dynamics Control

A Novel Bi-directional Solenoid Actuator for Hydraulic Valves

Dipl.-Ing. M. Hoffmann,
Dipl.-Ing. Ch. Schmidt, Dr.-Ing. R. Becker,
Dr.-Ing. M. Grepl, Dr.-Ing. B. Buchtala,
Robert Bosch GmbH, Stuttgart, Germany
Prof. Dr.-Ing. O. Nelles,
Institut für Mechanik und Regelungstechnik-Mechatronik (MRT), Universität Siegen, 

Dr.-Ing. J. Gamble,
Magnet-Schultz of America Inc. Illinois, USA
Dr.-Ing. P. Tappe,
Magnet-Schultz GmbH, Memmingen, Germany

Modelling and Identification Methodology of Components for Train Braking Systems

Evolutionary Multiobjective Hardware-in-the-Loop Optimization of a Hydraulic Valve Controller

Prof. Ing. F. Pescarmona,
Prof. G. Belforte, Prof. C. Ferraresi, Prof. V. Viktorov, Dr.-Ing. M. Martinelli,
Departments of Mechanics,
Politecnico of Turino, Italy
Dr.-Ing. R. Tione,
Research end Development Department - Faiveley Trasport Piossasco, Italy

Dipl.-Ing. J. Krettek, Dr. rer. nat. F. Hoffmann, Prof. Dr.-Ing. Prof. h. c. T. Bertram,
Lehrstuhl Regelungssystemtechnik, Universität Dortmund, Germany

Development and Experimental Results of a
Self-energizing Electro-Hydraulic Brake (SEHB) using switching valves
 

Simulation of Elastohydrodynamic Contact between Piston and Cylinder in Axial Piston Pumps

Dipl.-Ing. M. Liermann, Dr.-Ing. Ch. Stammen, Univ.-Prof. Dr.-Ing. H. Murrenhoff,
IFAS, RWTH Aachen, Germany

M. Sc. A. Fatemi, Dipl.-Ing. A. Wohlers,
Univ.-Prof. Dr.-Ing. H. Murrenhoff,
IFAS, RWTH Aachen, Germany

19.00